Melt Blown Filter Cartridge
PP Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
|
Filter Media |
Polypropylene |
|
Lengths |
5/10/20/30/40/50/60 inch |
|
Diameter |
OD. Φ 63-115 mm，ID. Φ 28/30 mm |
|
With / Without Core |
Polypropylene Core |
|
Removal Ratings |
1-50 micron |
|
Max.pressure-proof |
0.4 Mpa at 25oC |
|
Max. Operations Temperature |
60oC |
|
Max.pressure drop |
0.2Mpa |
|
Liquid Flow rate |
20 L/Min |
|
Application |
Drinking Water Treatment; Electronic;Industrial Water Treatment Plating;Chemicals,solvents. |
(Table A)
|
Item No.
|
Nominal filter Rating (Micron) |
Absolute Filter Rating(Micron) |
Max. Particle Size (Micron) |
Liquid Flow Rate (L/Min) |
|
AM01 |
1 μm |
10μm |
15μm |
10 L/Min |
|
AM05 |
5 μm |
30μm |
35 μm |
18 L/Min |
|
AM10 |
10 μm |
35μm |
40 μm |
20 L/Min |
|
AM20 |
20μm |
40μm |
50 μm |
25 L/Min |
|
AM30 |
30μm |
50μm |
60 μm |
28 L/Min |
(Table B )
Remark:All Technical Data of the brochure is measured from long filter cartridge sized 10inch.
We can also add 222/226 O-ring and Fin /Flat with the filter.